Load Cell Accuracy | ±0.1% (Whole) |
---|---|
Weight | About 27KG |
Load Cell | 10kg, 20kg, 50kg Option |
Power | 1/2PH, AC220V (or 110V), 5A |
Size | 50*40*30cm (W*D*H) |
Item Name | Hand Roller , Manual Roll Down Unit |
---|---|
Wheel Diameter | 84±1mm |
Rubber Thickness | 6mm |
Rubber Hardness | 80±5HS |
Wheel Width | 45mm(metal Wheel) |
Measure Range | 0-500N |
---|---|
Force Accuracy | + / - 1% |
Test Content | Loop Tack Test, Initial Tack Test |
Test Speed | 0.5~300mm/min |
Test Plate | 150.0mm X 24.0mm X 2.0mm |
Meet Standards | GB/4852, CNS 11888 |
---|---|
Tilt Angle | 20° ~ 40° Adjustable, ( Normal Use 30°) |
Item Name | Roll Ball Initial Tack Tester |
Weight | 500g Weight Equipped |
Run-up Segment | 100mm |
Meet Standards | GB/4852, CNS 11888 |
---|---|
Tilt Angle | 20° ~ 40° Adjustable, ( Normal Use 30°) |
Item Name | Roll Ball Initial Tack Tester |
Weight | 500g Weight Equipped |
Run-up Segment | 100mm |
Temperature | Room Temperature |
---|---|
Timer | 20 Sets/PLC |
Weight | About 25 Kg |
Size | 90×31×73 Cm(W*D*H) |
Test Fixture | 20 Sets |
Device Name | 30 Positions Retentivity Testing Equipment |
---|---|
Environmental Temperature | Room Temperature |
Weight | 1000g X 30 Pieces |
Timer | 30 Sets Or PLC |
Stainless Steel Plate | SUS#304 X 30 Pieces |
Temperature | Room Temperature |
---|---|
Timer | 30 Sets/PLC |
Weight | About 30 Kg |
Size | About 90×31×103 Cm |
Test Fixture | 30 Sets |
Run-up Segment | 100mm |
---|---|
Weight | 500g |
Rolling Ball | 29 Pieces,not Including No.1, No.27, No.31 |
Design Standards | GB/T 4852 |
Packaging Details | packaged in paper box |
Temperature | Room Temperature |
---|---|
Timer | 30 Sets/PLC |
Weight | 1kg Standard Weight Foe Each |
Size | About 90×31×103 Cm |
Test Fixture | 30 Sets |