Separated Type Environmental Test Chamber , Walk In Temperature Humidity Chamber Room
Appication :
It can also place a lot of items under test for reliability test, so as to shorten the total test time of a single product, or for products of the temperature and humidity stress screening (ESS), and need space larger dynamic test (such as printers dynamic temperature and humidity test), and bulky products are applicable to the equipment.
Test Room characteristics :
| Volume | Inner size(D×W×H) | Workroom Outer (D×W×H) |
Complete (D×W×H)* |
Door (W×H) |
| 8M3 | 2000×2000×2000 | 2900×2300×2550 | (3900～4550)×2300×2550 | 1000×2000* |
| 10M3 | 2500×2000×2000 | 3400×2300×2550 | (4500～5050)×2300×2550 | 1000×2000* |
| 12M3 | 2500×2500×2000 | 3400×2800×2550 | (4500～5050)×2800×2550 | 1000×2000* |
| 14M3 | 3200×2000×2200 | 4100×2300×2750 | (5100～5750)×2300×2750 | 1000×2000* |
| 16M3 | 3200×2000×2500 | 4100×2300×3050 | (5100～5750)×2300×3050 | 1000×2500* |
| 20M3 | 3600×2500×2200 | 4500×2800×2750 | (5500～6150)×2800×2750 | 2000×2200 |
| 22M3 | 3600×2500×2500 | 4500×2800×3050 | (5500～6150)×2800×3050 | 2000×2500 |
| 25M3 | 4000×2500×2500 | 4900×2800×3050 | (5900～6550)×2800×3050 | 2000×2500 |
| 26M3 | 4000×3000×2200 | 4900×3300×2750 | (5900～6550)×3300×2750 | 2500×2200 |
| 32M3 | 5200×2500×2500 | 6100×2800×3050 | (7100～7800)×2800×3050 | 2000×2500 |
| 34M3 | 5200×3000×2200 | 6100×3300×2550 | (7100～7800)×3300×2550 | 2500×2200 |
| 38M3 | 3600×3500×3000 | 4650×3800×3550 | (5650～6300)×3800×3550 | 2500×2500 |
| 44M3 | 4400×4000×2500 | 5450×4300×3050 | (6450～7100)×4300×3050 | 2500×2500 |
| 46M3 | 4400×3500×3000 | 5450×3800×3550 | (6450～7100)×3800×3550 | 2500×2500 |
| 48M3 | 4800×4000×2500 | 5850×4300×3050 | (6850～7500)×4300×3050 | 2500×2500 |
Noted : Single door(Standard),Optional double-door,Machine dimensions vary with size of cooling unit.
Test Chamber Paramenters :
| Temp.range(℃) | -20℃,-40℃,-60℃,-70℃~150℃ |
| Humidity Range(%RH) | 20%R.H~98%R.H |
| Temperature Fluctuation (℃) | ±0.5℃ |
| Temperature uniformity (℃) | ≤±2℃ |
| Humidity fluctuation | ±2.5%RH |
| Humidity uniformity (%RH) | >75%RH:≤+2,-3%RH,B)<75%RH:≤±5%RH |
| Heating rate | 3℃/min , no load |
| Cooling rate | 0.7~1℃/min , no load |
| Temperature and humidity control system | Import LCD digital display controller |
| Heated Humidification system | Nichrome wire-efficiency heater, UL-shaped stainless steel plating heater |
| Cooling System |
1.Compressor: French imported hermetic compressors. 2.Refrigerant: Environmentally friendly refrigerant R404A, the destruction of the ozone layer was 0 (ODP = 0.00). 3.Condenser: Fin-type with the cooling motor. 4.Evaporator: Fin-type multi-stage automatic load capacity adjustment. 5.Other accessories: Desiccant, repair valves, solenoid valves in Japan. 6.Expansion systems: Capacity automatic control throttling of the refrigeration system |
| Inner Material | SUS#304 stainless steel. |
| Outer Material | Spray color galvanized steel sheet |
| Insulation Materials | Ultra-fine glass fiber insulation cotton. |
| Communication function | Equipped with the standard RS232C/RS485 communication interface, the maximum transmission distance is 1.2km, and the communication speed is up to 9600bps. It can connect to the computer for remote monitoring and operation. |
| Auxiliary function | Fault alarm and causes of reminders, name can be changed, the upper limit of temperature protection function, timing and booking (to be automatic stop and automatic start function), multiple sets of group (up to 6) P I D segmented temperature control alone, curve display and save the PV curve 0 to 8 days.The temperature can be set to run in a linear fashion (it can set the rate of rise/drop in temperature per hour) |
| standard configuration |
1. Power cord 4.0mm squared x5 pistils, low impedance rubber cable 3m long 1 2. Stainless steel SUS #304 square punch plate holder 2 pieces 3. Stainless steel adjustable spacing rack track 2 sets 4. One energy-saving lamp 5. The left side of the body USES a 50mm test hole with 1 stainless steel hole cover and 1 silicone plug head. 6. One roll of weather gauze for standard test 7. One set of fuse (wearing parts) 8. One set of operating instructions |
| Design Standard |
JB/6527-92 GB8624-1997 GB102 97-88
|
