Thermal Cycling Chamber / Thermal Shock Test Chamber Hot And Cold Impact Tester

 Two Cabinets Thermal Shock Test Chamber Hot And Cold Impact Tester

Thermal Shock Test Chamber Application :

Thermal Shock Chamber Cold Hot Impact Test /machines and equipments is also known as hot and cold impact testing machine used to test or composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber, electronic...Such as material, can be used as the basis of its product improvements or reference.

Feature:

• The best construction design to ensure smooth movement between cabinets.
• Using the new PWM refrigeration control technology to achieve 40% energy saving at low-temperature operation.
• Communication port equip to RS232 and USB port to save curves download function.
• Multiple alarm monitoring, configuration wireless remote alarm.
• Shock test move time within 5 seconds can meet MIL, IEC, JIS standard.
• Scalable: LN2V rapid cooling in liquid nitrogen control device.
• The world's first over-temperature protection and set conditions foolproof protection.
• Machine multiple protection devices, Error Fault Table software devices.

Specifications of Hot Cold Test Chamber :

Protection System :

1. Test samples over-temperature protection (independent).
2. With no fuse protection switch.
3. Heater over-temperature protection switch.
4. Compressors overload and overheat.
5. Compressor high and low voltage protection.
6. Over-current protective device.
7. The controller self-diagnosis fault and display.
8. Cooling water pressure is too low protection.

Standard configuration :

1. Power cable 4.0 mm² x 5 cores, low-impedance rubber cable 3m x 1.
2. Equipment electrical schematic diagram x 1.
3. SUS # 304 square punching stainless steel shelf x 2.
4. Stainless steel adjustable pitch shelf track of 2 groups.
5. An energy-efficient lighting.
6. Machine top Փ50mm a test hole attached stainless steel manhole cover, and with a silica gel plug. (option)
7. Standard Test Meteorological gauze Volume x 1.
8. Fuse set x 1 set (wearing parts).
9. Operation Manual x 1.