Plastic Parts Stripping Tesion Test Machine Tensile Stretch Tester For Sealing Ring
Plastic Tension Test Machine Description :
Plastic Parts Stripping Tesion Test Machine Tensile Stretch Tester For Sealing Ring is special design and development of economical testing machine to use for adhesive, paper products and printing and packaging, food, electronics, springs, buttons and other industries, after purchasing and replacement tensile, pressure or three-point bending gripers or fixture can be used for a variety of different ways test, or to purchase other electronic devices function, can be a variety of materials and finished products, semi-finished products for strength, elongation, stress, strain and other aspects of the test.Tensile Stretch Tester has a cost-effective, easy operation and simple maintenance of the advantages is that all factories and enterprises for quality testing and production of the ideal auxiliary equipment. It used to do Tension, pressure, bending, tearing, elongation, stripping, adhesion, high viscosity stripping test terminal tension, plastic parts stretching, sealing ring.
Plastic Tension Test Machine Features :
Machine Specifications :
| Product Name | Plastic Parts Stripping Tesion Test Machine Tensile Stretch Tester For Sealing Ring | ||
| Model No | PT-1198 (Standard) | PT-1198S (Upgraded) | PT-1198GT (Advanced) |
| Capacity Options | 2, 5, 10, 20, 50, 100 kgf | 2, 5, 10, 20, 50, 100, 200 kgf | |
| Force Measurement Accurate | Better than 1% | ||
| Unit Switch | Kgf, N, lbf | Kgf, N, gf, kN, lbf | |
| Strength Unit | Kpa | Kpa , Mpa, Kgf/cm², lbf/in² | |
| Test Speed | 0.5~500mm/min (Screen Setting) | ||
| Length Units | mm | mm, cm, in | |
| Test Item | test of stripping, adhesion, high viscosity stripping terminal tension, plastic parts stretching, sealing ring | ||
| Function | Break, Holding pressure, Timing | Break, Holding pressure, Timing, Force value, Displacement, With elongation displayed | |
| Displacement measurement | No | Yes | Yes |
| Maximum Stroke | 500mm | ||
| Front and Rear Space | 90mm | ||
| Griper Configuration | Tensile or compression griper for choose 1 | ||
| PC Expansion | No | USB port and software | |
| Weight | About 28 kg | ||
| Dimensions | 450×280×680 mm(W×D×H) | ||
| Power | 220V 50aHz (or 110V 60Hz) | ||
Tensile Stretch Tester Referred Picture :
1. Select the main fixture according to the maximum test force of the tensile tester. The maximum force that the fixture can withstand must be greater than or equal to the maximum test force of the host.
2. Select some secondary fixtures according to the non-standard configuration orextended configuration (for example, the extended configuration sensor is 10kN, and the maximum test force that the selected secondary fixture can withstand is also greater than or equal to 10kN).
3. Select the fixture according to the user’s sample (such as: sample shape provide by the user, test requirements, maximum test force, etc.)
4. What kind of fixtures are recommended for users (such as wire samples with a diameter of less than 1mm, including steel wires, iron wires, copper wires, wires, ropes, fibers, etc. Such products should bewound with clamps, but it cannot be avoided the larger the elongation error of the sample.
