Light Tube Aging Test Chamber Insulator Plastic Anti Yellow Test Machine
Anti Yellow Test Machine Descroption :
Light Tube Aging Test Chamber Insulator Plastic Anti Yellow Test Machine is the test equipment to provide the sun's heat and ultraviolet radiation simulation environment, use on yellowing accelerated testing of materials (normally test specimen put into test cabinet for 3 hours and set at 70℃ will equivalent in the natural environment 2 months yellowing results). Operator can take gray scale for staining as reference to determine the level of yellowing of materials; also can visual observation the degree of yellowing of specimen. if Light Tube Aging Test Chamber remove UV light source, can be used for aging oven or drying oven.
Anti Yellow Test Machine Parameters :
| Chamber Name | Light Tube Aging Test Chamber Insulator Plastic Anti Yellow Test Machine | |
| Model No | PT-2030A | PT-2030B |
| Inner Dimensions | 50×50×60 cm (W×D×H) | 51×32×26 cm (W×D×H) |
| Dimensions | 67×62×111 cm (W×D×H) | 68×34×37 cm (W×D×H) |
| Temperature Range | Room temperature (+5℃)～200℃ | Room temperature |
| Temperature Controller | P.I.D. Automatic Calculation | |
| Temperature Resolution | 0.1℃ | |
| Control Accuracy | ±0.3 ℃ (Drying, aging) | |
| Distribution Accuracy | ±1% (1℃) at-room 100℃ | |
| Timer | 0～999.9 Hours/Minutes, Electronic display, Power failure memory type, Buzzer | |
| Compartment tray | Dia. 45cm, 3 R.P.M, Height-adjustable | 2 layer,Height not adjustable |
| UV light source | Light bulb, UV/300W,with Bulb life timer | Light Tube X 2,15W |
| Standard Accessories | Shelves x 2 | |
| Heating Mode | Heated air circulation | |
| Safety Protection | Independent EGO over-temperature power failure, safety overload switch | |
| Oven Body Material | Outside is paint coating, inside is SUS#304 stainless steel | |
| Weight | 80kg | 12kg |
| Power | 1PH,AC220V,15A | 1PH,AC220V, 1A |
