Electronic Double Columns Press Pull Force Test Machine With Ball Screw
Press Pull Force Test Machine Application:
10KN Electronic Testing Machinein the industries of rubber plastic, paper products, printing and packaging, adhesive tape, cases, handbags, textile, pharmaceutical, cosmetic, food, electronic wire, etc.. Can the physical properties of the test all kinds of materials and finished products, semi-finished products, to buy all the different fixture do tensile, compressive strength, to pull, pressure, bending, tear, peel, adhesive force and the shear test.
Press Pull Force Test Machine Parameters:
| Product Name | Electronic Double Columns Press Pull Force Test Machine With Ball Screw |
| Model | PT-1161 |
| Capacity selection | 5,10,20,50,100,200,500,1000kg choose one |
| Monitor | Power and extended display |
| Accuracy of measurement | Better than±1.0% |
| Force resolution | 1/10,000 |
| Effective range of measurement | 1~100%F.S |
| Deformation display accuracy | Better than±1.0% |
| Test speed range | 5～500mm/min,can be arbitrarily set |
| Test maximum stroke | Maximum 1000mm, no fixture |
| Effective test space | About 400mm,After or before ∝ |
| Power unit switch | kgf,gf ,N,kN,Ibf |
| Stress unit switch | MPa,kPa,kgf/cm2,Ibf/in2 |
| Deformation unit switch | mmm,cm,etc |
| Stop mode | Upper and lower limit safety setting, emergency stop button, program strength and elongation setting, test piece failure |
| Point method | Manual and pre - set points (20 points) function in the test process |
| Standard configuration | Standard fixture 1 pay, equipment power supply line 1, CD disc operation manual 1, product certification 1, product warranty card 1 |
| Optional configuration | PT-211 two point extension of the fixture, a variety of test fixture |
| Machine size | about 98×51×160cm(W×D×H) |
| Machine weight | about 170kg |
| Power | DC motor |
| Power Supply | 1PH,AC220V,50/60Hz,10A or specified |
Image:
