500KG Tensile Testing Machine Digital Display With Printer ASTM D527
Application Description:
500KG Tensile Testing Machine Digital Display With Printer, is a electric tensile tester , to test the tensile strength, compressive strength and elongation of various materials, semi-finished products and finished products. It can be used for peeling, tearing, bending, bending, and compression tests. It is suitable for metals, plastics, rubber, textiles, synthetic chemicals, wire and cable,hardware, leather and other industries
Test Contents :
Tensile strength, ampoule breaking force, film piercing force, infusion bag cap piercing force, soft rubber bottle stopper piercing/pulling force, breaking force, combined cap opening force, bottle cap tearing force, tear resistance, tape 90 degrees Peeling force, peeling force of plaster label, peeling force of adhesive, peeling at 180 degrees, adhesion strength of catheter and catheter joint pull force, toothbrush bristles pull force, rope pull force, fixed extension tensile test, bag mouth tension, Down pressure test, protective film, release paper separation force, plastic bottle pressure resistance,battery compression test,3 point bending,cloth fabric tensile...
500KG Tensile Testing Machine Parameters :
| Model | PT-1170 500KG Tensile Testing Machine Digital Display With Printer ASTM D527 | |
| Force Sensor | 2,5,10,20,50,100,200,500kgf, one option | |
| Display | force and extension display | |
| Force Measure Accuracy | ±1.0% | |
| Force Measure Resolution | 1/10,000 | |
| Effective Measure Range | 1~100%F.S | |
| Deformation Indication Accuracy | ±1.0% | |
| Test Speed | 1～500mm/min | |
| Test Travel | 850mm,exclude grip | |
| Test Space | Front and back 120mm,right left no limit | |
| Force Unit | kgf,gf ,N,kN,Ibf | |
| Stress Unit | MPa,kPa,kgf/cm2,Ibf/in2 | |
| Deformation Unit | mm,cm,in | |
| Stop Method | Upper and lower limit safety setting, emergency stop button, program force and elongation setting, test piece damage sensing | |
| Snap Point Method | Manually take points during the test and pre-set take points (20 points) | |
| Standard Configurations | 1 pair of grip, 1 micro printer, 1 power cord, 1 operation manual, 1 product certificate, 1 product warranty card | |
| Size | About 57×47×120cm(W×D×H) | |
| Weight | About 55kg | |
| Motor | Stepper | |
| Power Supply | 1PH,AC 220V,50/60Hz,or as requirement | |
Meet Standards :
ASTM E4,ASTM D882,ASTM D1938,ASTM D3330,ASTM F88,ASTM F904,JIS P8113
500KG Tensile Testing Machine Picture:
Part tests of 500KG Tensile Testing Machine :
