-40℃~150℃ Oven Type Retentivity Adhesive Testing Equipment
Specification:
| Model | PT-6015-10 | PT-6015-20 | PT-6015-30 |
|
Inner Dimensions (mm)
|
400×500×500(W*D*H) | 60×80×85cm(W*D*H) | 100×80×100(W*D*H) |
| Position | 10 Position | 20 Position | 30 Position |
| Standard Configuration | 10 pieces of 1KG weight, 10 pieces of connecting piece, 10 pieces of holding steel plate, PLC timing control | 20 pieces of 1KG weight, 20 pieces of connecting piece, 20 pieces of holding steel plate, PLC timing control | 30 pieces of 1KG weight, 30 pieces of connecting piece, 30 pieces of holding steel plate, PLC timing control |
| Temperature Range(℃) | -40℃~150℃ | ||
| Humidity Range(%RH) | 20%R.H~98%R.H | ||
| Temperature Fluctuation(℃) | ±0.5℃ | ||
| Temperature Uniformity(℃) | ≤±2℃ | ||
|
Humidity Fluctuation (%RH) |
±2.5%RH | ||
|
Humidity Uniformity (%RH) |
>75%RH:≤+2,-3%RH,B)<75%RH:≤±5%RH | ||
| Heating Rate(℃) | 3℃/min (At no load) | ||
| Cooling Rate(℃) | 0.7~1℃/min (At no load) | ||
| Control System Of Temperature And Humidity | Imported LCD digital display controller | ||
| Heating And Humidifying System | Ni-cr wire type high efficiency heater, UL type stainless steel electroplating heater | ||
| Cooling System |
1. Compressor: France imported Taikang brand fully enclosed compressor
3. Condenser: Fin type with heat dissipation motor 4. evaporator: fin type multi-stage automatic load capacity adjustment 5. Other accessories: desiccant, repair valve, solenoid valve 6. Expansion system: Refrigeration system with automatic control of throttling and pressure reduction |
||
| Liner Material | SUS＃304 Stainless steel plate | ||
| Shell Material | Painted galvanized steel sheet | ||
| Insulation Material | Ultrafine fiberglass insulation cotton | ||
| POWER | 380V | ||
Uses: This product performs a static load test on the adhesive force of the tape. It automatically counts the time the tape can hold under a certain load and under the conditions of low temperature, high temperature, temperature and humidity, and its cyclic change to confirm the timeliness of the tape adhesion. Except for the jig, this box can also be used as a standard constant temperature and humidity test box.
Picture:
