Lab Small Coating Machine Scraper Coating And Wire Rod 150 um
Introduction: PT-5000AH small coating machine, NC controllable pitch control, digital display fine-tuning thick in the similar products are special design, the whole machine adopts 304 stainless steel material manufacturing, important parts adopt imported parts, to ensure the quality of the whole machine warranty for one year, the main supply major research institute and the laboratory.The coating machine is apply to different substrates to produce accurate wet film samples.
It is a machine that applies paint, glue, and pigment to the solid continuous film formed by one or more coatings on the substrate,such as paper,film,tape,PVC ,etc.The lab small coating machine simulate manual coating but with a certain speed.Place the substrate on the plane of the machine, pour glue, paint, etc. on the side, then fix it with a scraper or the corresponding wire rod, start the machine and push it aside to make a wet film sample.
|PT-5000AH Small Coating Machine
|Effective Coating Space
|About 60×25×350 cm (W×D×H)
|AC 220V, 50Hz
|PLC touch screen
1. Taiwan advanced design, space saving, smaller and more beautiful machine
2. The fuselage adopts automobile high-light spraying technology
3. PLC touch screen controller can be set independently. Various modes can be stored.Different people in different time to operate the machine, all coating parameters to ensure a high degree of consistency, the error is minimal.
4. Maximum accuracy ±1, subverting the traditional calibration by naked eye observation micro scale, more accurate and more human, there are two units, mm, inch, suitable for different needs.
5. Imported stepper motor drive is adopted, which is more stable in operation, longer in service life and more accurate in stroke control compared with traditional belt drive.
6. The whole machine is guaranteed for one year. The imported products guarantee the technology and meet all kinds of test standards.
7. Dual-use, wire rod mode is applicable to all imported domestic wire rod, while scraper mode effectively combines the advantages of wire rod and scraper, diversified functions and simple operation.
Coating Machine Picture:
Wire Rod Options :
(the rod specification choice are according to thickness of coating thickness. Solid content = dry film divided by wet film multiplied by 100%)
|Contact Person :