150J Energy Digital Display Impact Strength Tester Charpy ASTM E23
Machine Introduction:
150J Energy Digital Display Impact Strength Tester Charpy ASTM E23 is used to measure the resistance of metal materials to impact under dynamic load, so as to judge the quality of materials under dynamic load.The semi-automatic control testing machine is easy to make and has high work efficiency. The swing and swing are all automatically controlled.Digital display impact testing machine is especially suitable for continuous impact testing laboratories and a large number of impact testing industries such as metallurgy, machinery manufacturing, and steel.
Meet Standards:
ASTM E23 , GB/T3808-2002, GB/T229-2007
Main Function:
It is used for metal Charpy impact test to determine the impact absorption energy and impact toughness of metal material samples.
Impact Test Equipnment Parameters:
1. Impact energy: 300J (big hammer), 150J (small hammer)
2. Impact speed: 5.2m/s
3. Pendulum pre-lift angle: 150°
4. Span of specimen support: 40mm
5. Round corner of support clamp: R1.0~1.5mm
6. Rounded corner of impact blade: R2.0~2.5mm; R8
7. Distance from pendulum center to impact point: 750mm
8. Standard specimen size: 10×10(7.5 or 5)×55mm
9. Pendulum moment: M=160.7695N.m 80.3848N.m
10. Power supply: 3 phase 4 wire, 50Hz, 380V, 180W
11. Machine Size: 2124*600*1340mm
12. Weight: About 450Kg
Main feature:
1. The main body of is of single-support column structure, cantilever type hanging pendulum, and pendulum hammer body C type;
2. The impact knife is installed and fixed with screws, which is simple and convenient to replace;
3. Sample simply supported beam support;
4. The host is equipped with safety protection pins and equipped with a safety protection net;
5. The testing machine is semi-automatically controlled. Pendulum raising, hanging pendulum, impact and placement are all electrically controlled, and can use the remaining energy after breaking the sample to automatically raise the pendulum to prepare for the next test, especially suitable for continuous impact Test laboratories and metallurgical and mechanical manufacturing departments that do a large number of impact tests;
Main Configurations :
1. Main machine, 1 set
2. Pendulum: 150J , 300J, 1 piece
3. Inner hexagon wrench( S=12): 1 piece
4. Support adjuster: 1 piece
5. Specimen centralizer: 1 piece
6. Disassembler (for swing): 1 piece
7. Foundation screws: 4 pieces
8. Adjust inclined iron : 4 pieces
9. Protective net ; 1 piece
Pendulum Impact Tester Picture :
Detailed Photos Of Impact Machine:
