Temperature | Normal Temperature |
---|---|
Connector | 8 Pieces |
Weight | About 40kg |
Size(W*D*H) | Up : 45×20×60cm Low: 45×20×30cm |
Stainless Steel Plate | 8 Pieces ,304# |
Type | Horizonal Type Tensile / Peel Strength Tester |
---|---|
Display | Touch Type Force And Extention Display |
Testing Speed | 1~400mm/min |
Test Stroke | Max 300mm |
Motor | Servo Motor |
Measurement Accuracy | ±0.5% |
---|---|
Test Speed | 0.01~3000mm Per Minute |
Test Stroke | Max 700mm、 1000mm, One Option,exclude Grip |
Motor | AC Servo Motor |
Min Test Force | 0.05g |
Test Stroke | Maximum 650mm, Not Contain Fixture |
---|---|
Unit Switchover | KG ; N ; LB ; G |
Force Resolution | 1/10,000 |
Size | 58×45×125cm(W×D×H) |
Weight | 75kg |
Capacity Option | 2, 5, 10, 20, 50, 100 ,200kgf |
---|---|
Max Stroke | About 300mm |
Front And Rear Space | 90mm |
Test Speed | 0.5~500mm/min (Screen Set) |
Power | 220V 50aHz (or 110V 60Hz) |
Test Force Accuracy | Better Than ±01% |
---|---|
Dimensions | 630*500*1600mm (W*D*H) |
Weight | About 165 Kg |
Max Stroke | 1000 Mm |
Power | 1Ø, AC220V, 50/60HZ, 10A |
Test Item | 90˚ Peel, 180˚ Peel, Loop Tack, Shear,tension,elongation... |
---|---|
Specimen | Adhesive Tape, Film,label, Sticker, Liner |
Sensor Capacity | Any One Of 2、5、10、20、50、100kgf |
Test Speed | 0.1~1000mm/min |
Test Stroke | 650mm |
Standards | GB/4852 And CNS 11888 |
---|---|
Tilt Angle | 20° ~ 40° Adjustable, ( Normal Use 30°) |
Item | Rolling Balls Tape Initial Tackness Testing |
Weight | 500g Weight Equipped |
Run-up Segment | 100mm |
Item | Adhesion Tester,shear Tester, Holding Power Tester |
---|---|
Applicable Specimens | Label, Film, Adhesive Tape, Release Paper,etc |
Workpostions | 30 |
Accessories | Roller, Steel Plate, Weights |
Packaging Details | Wooden Case |
Capacity Option | 20N,,50N, 100N, 200N, 500N, 1KN |
---|---|
Motor | AC Servo Motor |
Dimensions | 57×47×120cm (W×D×H) |
Max Test Stroke | Max 650mm, Include Grippers Length |
Effective Test Space | Diameter Of 120mm |