| Max Load | 100kN |
|---|---|
| Temperature Range | Room Temperature ~ 200℃ |
| Control Method | P.I.D. Automatic Temperature Calculation. |
| Distribution Accuracy | Distribution Accuracy |
| Force Measurement Accuracy | Better Than ±1% |
| Test Force Capacity | Max 300 KN |
|---|---|
| Item Name | 300KN Universal Testing Machine |
| Force Measure Grade | 1 Class |
| Tensile Space | 600mm |
| Compress Space | 500mm |
| Unit Switching | Multiple Measurement Units Including International Units |
|---|---|
| Power | AC Servo Motor |
| Input Ports | Load Cell Input, CCD Industrial Camera Interface, Analysis Software Interface |
| Analysis Software | Dedicated Image Analysis Software |
| Force Accuracy | Better Than ±0.5% (GB-0.5 Level) |
| Heating Rate | 3°C/min (no Load) |
|---|---|
| Standard Configuration | Special Rubber Fixtures 1 Set, Software And Data Cable 1 Set, Equipment Power Cord 1, CCD Industrial Camera 1, High-precision Camera 1, Operation Manual 1, Product Certificate 1, Product Warranty Card 1 |
| Analysis Software | Dedicated Image Analysis Software |
| Control Method | Computer Control System |
| Temperature Control Range | -20°C To 100°C (with Window And Lighting) |
| Machine Name | Dual Column Universal Testing Machine 10KN |
|---|---|
| Load Cell | 1KN,2KN,5KN,10KN,20KN |
| Test Travel | 1000mm,exclude Grip/clamp |
| Test Speed | 0.05~1000mm/min |
| Force Accuracy | ±0.5% |
| Industrial Lens | High-resolution Lens |
|---|---|
| Unit Switching | Multiple Measurement Units Including International Units |
| Standard Configuration | Special Rubber Fixtures 1 Set, Software And Data Cable 1 Set, Equipment Power Cord 1, CCD Industrial Camera 1, High-precision Camera 1, Operation Manual 1, Product Certificate 1, Product Warranty Card 1 |
| Control Method | Computer Control System |
| Heating Rate | 3°C/min (no Load) |
| Analysis Software | Dedicated Image Analysis Software |
|---|---|
| Input Ports | Load Cell Input, CCD Industrial Camera Interface, Analysis Software Interface |
| Machine Size/Weight | Approximately 100×50×65cm (W×D×H) / Approximately 70kg |
| Cooling Rate | 0.7 To 1°C/min (no Load) |
| Standard Configuration | Special Rubber Fixtures 1 Set, Software And Data Cable 1 Set, Equipment Power Cord 1, CCD Industrial Camera 1, High-precision Camera 1, Operation Manual 1, Product Certificate 1, Product Warranty Card 1 |
| Data Acquisition System | Computer |
|---|---|
| Test Force Range | 0.5-500kN |
| Force Unit | Kgf、N、lbf、Kpa |
| Weight | 45kg |
| Power Supply | AC220V/50Hz 1PH |
| Optional Configuration | Commercial Computer, Printer 1 |
|---|---|
| Input Ports | Load Cell Input, CCD Industrial Camera Interface, Analysis Software Interface |
| Cooling Rate | 0.7 To 1°C/min (no Load) |
| Temperature Fluctuation | ±0.5°C |
| Standard Configuration | Special Rubber Fixtures 1 Set, Software And Data Cable 1 Set, Equipment Power Cord 1, CCD Industrial Camera 1, High-precision Camera 1, Operation Manual 1, Product Certificate 1, Product Warranty Card 1 |
| Item Name | Leak Seal Strength Testing Machine |
|---|---|
| Follow Standards | ASTM F1140、ASTM F2054,YBB 00252005 |
| Test Range | 0~250KPa, 0~36.3 Psi (Standard ) |
| Pressure Of Compressed Air Source | 0.4MPa~0.9MPa (cutomer Prepare Air Source) |
| Air Source Inlet Size | Φ8mm Polyurethane Pipe |