| Test Force Accuracy | Better Than ±01% |
|---|---|
| Dimensions | 630*500*1600mm (W*D*H) |
| Weight | About 120kg |
| Max Test Stroke | 1000 Mm |
| Power | 1Ø, AC220V, 50/60HZ, 10A |
| Effective Measure Range | 2%-100%FS |
|---|---|
| Max Load Force | 1000KN (100T) |
| Tensile Space | 700mm |
| Compress Space | 500mm |
| Test Specimen | Metal,Steel ,Aluminium ,Copper, Wire, Reber, Concrete,etc |
| Max Test Foce | 600KN |
|---|---|
| Tensile Space | 600mm |
| Compress Space | 500mm |
| Round Sample Clamp Range | Φ6-Φ40mm |
| Flat Sample Clamp Thickness | 0-30mm |
| Test Force Accuracy | Better Than ±01% |
|---|---|
| Dimensions | 630*500*1600mm (W*D*H) |
| Weight | About 120kg |
| Max Test Stroke | 1000 Mm |
| Power | 1Ø, AC220V, 50/60HZ, 10A |
| Test Force Accuracy | Better Than ±01% |
|---|---|
| Dimensions | 630*500*1600mm (W*D*H) |
| Weight | About 120kg |
| Max Test Stroke | 1000 Mm |
| Power | 1Ø, AC220V, 50/60HZ, 10A |
| Coating Method | Air Knife |
|---|---|
| Coating Speed | 0-20 M/min |
| Coating Thickness | 0.01-2.0 Mm |
| Coating Width | 200-600 Mm |
| Max. Mechanical Speed | 200 M/min |
| Max Test Force | 200KN,20Tons |
|---|---|
| Pressure Plate Size | φ100 Mm |
| Bending Supporting Roller Spacing | 30cm |
| Relative Humidity Not | No More Than 80% |
| Working Environment Temp | Room Temperature To 35 ° C |
| Test Force Accuracy | Better Than ±01% |
|---|---|
| Max Test Stroke | 1000 Mm |
| Power | 1Ø, AC220V, 50/60HZ, 10A |
| Test Force Resolution | 1/100,000 |
| Item | Double Columns, Computer Servo |
| Industrial Lens | High-resolution Lens |
|---|---|
| Unit Switching | Multiple Measurement Units Including International Units |
| Standard Configuration | Special Rubber Fixtures 1 Set, Software And Data Cable 1 Set, Equipment Power Cord 1, CCD Industrial Camera 1, High-precision Camera 1, Operation Manual 1, Product Certificate 1, Product Warranty Card 1 |
| Control Method | Computer Control System |
| Heating Rate | 3°C/min (no Load) |
| Test Force | Max . 600 KN |
|---|---|
| Clamping Method | Hydraulic Clamping |
| Piston Stroke | 25cm |
| Pistons Maximum Speed | 100mm / Min |
| Maximum Tensile Test Space | 65cm (including The Piston Stroke) |